保压机 热熔胶眼镜盒 工艺品上胶
详细描述
主要技术参数 Main Technical PARAMETERS
●出胶：MODEL JI 42V 条状自动定量控制喷胶
●出胶：VH98V螺旋露状喷胶,点状，条状。
●胶筒容量：1kg
●电热功率：800W
●电压：220V
●操作温度：220℃上限
●可视胶质设定温度使用。
◆Adhesive-ejecting:Model JI 42V automatically co**ols throwing adhesive in fixed quantity and a strip.
◆Adhesive-ejecting:VH 98V throws adhesive in a fine spiral spray.
◆Tank capacity:1kg
◆Electric power:800w
◆Voltage:110/220V
◆Operating temperature:** limit 220℃ you can set the temperature by looking at colloidal matter.
功能特点 Functions and features
●出胶大小可顺畅调整，喷嘴有0.5mm-5mm规格胶量
●**质、**率，风压由1kg-6kg调整出胶流速。
◆Adhesive-ejecting amount can smoothly be adjusted with the nozzle h**ing 0.5mm-5mm amount of adhesive.
◆The flow of adhesive is best, efficiently adjusted at lkg-6kg wind pressure.
●出胶：MODEL JI 42V 条状自动定量控制喷胶
●出胶：VH98V螺旋露状喷胶,点状，条状。
●胶筒容量：1kg
●电热功率：800W
●电压：220V
●操作温度：220℃上限
●可视胶质设定温度使用。
◆Adhesive-ejecting:Model JI 42V automatically co**ols throwing adhesive in fixed quantity and a strip.
◆Adhesive-ejecting:VH 98V throws adhesive in a fine spiral spray.
◆Tank capacity:1kg
◆Electric power:800w
◆Voltage:110/220V
◆Operating temperature:** limit 220℃ you can set the temperature by looking at colloidal matter.
功能特点 Functions and features
●出胶大小可顺畅调整，喷嘴有0.5mm-5mm规格胶量
●**质、**率，风压由1kg-6kg调整出胶流速。
◆Adhesive-ejecting amount can smoothly be adjusted with the nozzle h**ing 0.5mm-5mm amount of adhesive.
◆The flow of adhesive is best, efficiently adjusted at lkg-6kg wind pressure.